![]() |
![]() |
![]() |
Personal Protective Equipment (PPE)Always wear PPE (e.g. gloves, eye protection) when there is a potential for exposure to blood or body fluids. This is proven to be the single most effective precaution to avoid exposure. PPE should be readily accessible. If some PPE that you feel is necessary for your protection is not available to you, contact your supervisor. Gloves as PPEGloves may be made of latex, nitrile, rubber, or other impervious materials. If glove material is thin or flimsy, double gloving may provide additional protection. If you have cuts or sores on your hands, you should cover these with a bandage as additional protection before putting on gloves. Inspect gloves before putting them on to check for tears or punctures and replace them at that point if they are damaged. Remove gloves carefully, trying not to touch the outside of the gloves with bare skin. The established method for removing gloves without contaminating hands is:
After removal, discard contaminated gloves in the medical waste box. (More information on medical waste boxes and red biohazard bags is provided in the training section to follow, titled, Disposal of Contaminated Materials.) Always wash hands thoroughly as the final step. A Word about Latex Allergy Symptoms may include flushing, skin rashes, hives, runny nose, sneezing, itchy eyes, scratchy throat and wheezing. Rarely and over time, with repeated exposures, symptoms may escalate to anaphylactic shock. However, the response would unlikely be the first indication of a person’s adverse reaction to latex. Minimizing the Risk of Latex
Other PPE that may be neededGoggles Because bloodborne pathogens can be transmitted through the mucous membranes of the eyes, it is very important to protect them by using chemical splash goggles if there is a potential for splash or spray to occur in the course of your work. Face shields Face shields may also be worn in addition to goggles to provide additional face protection against splashes to the mouth and nose. Gowns or Lab Coats Wear gowns or lab coats to protect clothing and to keep blood or OPIM from soaking through to the skin. Contaminated Clothing Personal clothing that becomes contaminated with blood should be removed as soon as possible to avoid fluids from seeping through and coming in contact with skin. Contaminated laundry should be handled as little as possible and placed in a red biohazard bag until it is decontaminated, disposed of, or laundered. Machine washing with hot water and detergent is sufficient to clean soiled personal clothing. Bleach can be added as an additional disinfectant measure. Points to remember:
|
|
For a disclaimer and information regarding the use of this page, see the disclaimer notice. Web page comments: marcians@princeton.edu. |